2011 Tipping Skip

with roller automatic and
protected roller skid

Technical Specifications

This tipping skip stands out due to its convenient pivot point and the load distribution. Welded oil and watertight, available in many sizes. With all-round edge reinforcement, with rope pull for tipping and slipping safety mechanism. Roller mechanism with automatic release. Can be tipped in any position by cable pull from the driver’s seat. Safeguard against inadvertent slipping and tipping. Sturdy base frame with run-in recesses.

As standard in Eichinger-Orange (similar to RAL 2000)

Supplementary Equipment

Can be supplied as option:

  • 2 steering and 2 horse rollers
  • pushing handle
  • cover, galvanised, multi-pieces
  • hydraulic tipping device
  • lifting lugs
  • lifting coupling
  • in RAL special colour, lacquered
  • in RAL special colour, powder-coated
  • zinc-dipped design
  • stainless steel design

Dimensions

Type Vol. Load Cap.
2011.4 300 1000
2011.7 400 1000
2011.8 500 1000
2011.9 600 1000
2011.10 750 1000
2011.11 800 1500
2011.12 1000 2000
2011.13 1250 2500
2011.14 1500 3000
2011.15 1750 3500
2011.16 2000 3500
2011.30 2250 3500
2011.17 2500 4000
2011.18 3000 4000
Schwerlast-Kippbehälter 2011 in Anwendung

2012 Tipping Skip

with roller automatic at low
total height

Technical Specifications

Rectangular shape with 3 mm sheet steel edge-profile surround, oil-tight and water-tight welded joins.

Lower overall height with optimum tipping angle, can be tipped in any position by cable pull from the driver’s seat. Safeguard against inadvertent slipping and tipping. Sturdy base frame with run-in recesses.

As standard in Eichinger-Orange (similar to RAL 2000).

Supplementary Equipment

Can be supplied as option:

  • 2 steering and 2 horse rollers
  • pushing handle
  • cover, galvanised, multi-pieces
  • hydraulic tipping device
  • tipping brake
  • side wall part
  • lifting lugs
  • lifting coupling
  • in RAL special colour, lacquered
  • in RAL special colour, powder-coated
  • zinc-dipped design
  • stainless steel design

Dimensions

Type Vol. Load Cap.
2012.4 300 1000
2012.7 400 1000
2012.8 500 1000
2012.10 750 1000
2012.12 1000 1500
2012.14 1500 1500

2013 Tipping Skip

of high total height and transverse
to driving direction

Technical Specifications

The extremely high square container with a pivoting/tipping mechanism supported in a curve ensures an optimum load centre of mass. The docking pockets are doubly arranged in the massive section frame. The container can therefore be docked from all directions and can be tipped in and transverse to driving direction. With all-round edge reinforcement, rope pull for mechanical tipping and slip protection.

As standard in Eichinger-Orange (similar to RAL 2000).

Supplementary Equipment

Can be supplied as option:

  • 2 steering and 2 horse rollers
  • pushing handle
  • cover, galvanised, multi-pieces
  • lifting lugs
  • lifting coupling
  • in RAL special colour, lacquered
  • in RAL special colour, powder-coated
  • zinc-dipped design
  • stainless steel design

Dimensions

Type Vol. Load Cap.
2013.4 300 1000
2013.8 500 1000
2013.9 600 1000
2013.10 750 1000
2013.12 1000 1000
2013.13 1250 1500
2013.14 1500 1500

2014 Tipping Skip

of low total height with
small tipping angle

Technical Specifications

Low, oil and watertight welded container with special scissors-type tipping mechanism. The base frame and container are fixed together via the scissors struts, so that an optimum guiding is ensured during the tipping operation. Also a collision with solid obstacles, e.g. the edge of a transfer container has no infl uence on the tipping operation. With protection against unintended slipping and tipping out and stable base frame with integrated docking pockets.

As standard in Eichinger-Orange (similar to RAL 2000).

Supplementary Equipment

Can be supplied as option:

  • 2 steering and 2 horse rollers
  • pushing handle
  • cover, galvanised, multi-pieces
  • hydraulic tipping device
  • lifting lugs
  • lifting coupling
  • in RAL special colour, lacquered
  • in RAL special colour, powder-coated
  • zinc-dipped design
  • stainless steel design

Dimensions

Type Vol. Load Cap.
2014.4 300 1000
2014.7 400 1000
2014.8 500 1000
2014.10 750 1000
2014.12 1000 1000
2014.13 1250 1500
2014.14 1500 1500

2015 Tipping Skip

of high total height with
large tipping angle

Technical Specifications

Lock for tipping over the roller skids on the sides can be unlocked at the driver seat. A catching mechanism limits thethe tipping operation at approximately 90 0 and protects thee container from damage in this way. When the container is put upright again it will be automatically locked. With protection against unintended slipping.

As standard in Eichinger-Orange (similar to RAL 2000).

Supplementary Equipment

Can be supplied as option:

  • 2 steering and 2 horse rollers
  • pushing handle
  • cover, galvanised, multi-pieces
  • lifting lugs
  • lifting coupling
  • in RAL special colour, lacquered
  • in RAL special colour, powder-coated
  • zinc-dipped design
  • stainless steel design

Dimensions

Type Vol. Load Cap.
2015.4 300 1500
2015.7 400 2000
2015.8 500 2500
2015.9 600 2500
2015.10 750 3000
2015.11 800 3000
2015.12 1000 3000
2032.13 1250 3000
2015.14 1500 3000
2015.15 1750 3000
2015.16 2000 3000
2015.21 2250 3500
2015.17 2500 3500

Safe and comfortable to operate from the driver's seat

The massive tipping skips are of a square shape and manufactured from high-grade steel sheet welded oil and water-tight. The edges are stabilised by edge sections. The docking pockets for forklifts are integrated into the stable base frame.

Several models with different volumetric capacity and tipping angles can be selected depending on the requirements. The convenient support of the centre of mass of all models ensures optimum use of the forklift load capacity. The safety chain protects from unintended slipping and tipping.

The roller mechanism with automatic unlocking allows comfortable tipping in every position via rope pull from the driver seat.

2023 Tipping Skip

.
.

Technical Specifications

Square tipping skip from high-grade steel sheet with all-round section edge reinforcement, Rope pull for mechanical tipping operable from driver seat. Secured against unintentional slipping with chain.

As standard in Eichinger-Orange (similar to RAL 2000).

Supplementary Equipment

Can be supplied as option:

  • 2 steering and 2 horse rollers
  • pushing handle
  • cover, galvanised, multi-pieces
  • lifting lugs
  • lifting coupling
  • in RAL special colour, lacquered
  • in RAL special colour, powder-coated
  • zinc-dipped design
  • stainless steel design

Dimensions

Type Vol. Load Cap.
2023.1 150 750
2023.4 300 750
2023.8 500 1000
2023.10 750 1000
2023.12 1000 1500
2032.13 1250 1500
2023.14 1500 1500
2023.15 1750 1500
2023.16 2000 2000
2023.17 2500 2000

2024 Tipping Skip

extra large and massive
.

Technical Specifications

A tipping skip in XXXL. Enormously massive design with section side walls and robust triangular supports
allowing controlled tipping and putting upright.

  • massive, reinforced base frame with docking pockets
  • with all-round pan section and double reinforcement at the tipping out edge
  • support in swivel joint, can be tipped by 90° via rope pull

As standard in Eichinger-Orange (similar to RAL 2000).

Supplementary Equipment

Can be supplied as option:

  • 2 steering and 2 horse rollers
  • pushing handle
  • cover, galvanised, multi-pieces
  • hydraulic tipping device
  • tipping brake
  • lifting lugs
  • lifting coupling
  • in RAL special colour, lacquered
  • in RAL special colour, powder-coated
  • zinc-dipped design
  • stainless steel design

Dimensions

Type Vol. Load Cap.
2024.18 3000 2500
2024.20 4000 2500
2024.22 5000 2500
Kippbehälter 2024

2025 Tipping Skip

separately tippable, sorting
system “2in1” or “3in1”

Technical Specifications

The ingenious solution for separating recyclable material and waste: Collected pre-sorted in the 2 or 3 containers in different colours, which can be transported in one working step to the respective collecting container and tipped out separately. The ideal collecting station for facilitating work and cleanness in smaller production areas. With all-round edge reinforcement with rope pull for mechanical tipping and slipping protection.

Supplementary Equipment

Can be supplied as option:

  • 2 steering and 2 horse rollers
  • pushing handle
  • cover, galvanised, multi-pieces
  • lifting lugs
  • lifting coupling
  • in RAL special colour, lacquered
  • in RAL special colour, powder-coated
  • zinc-dipped design
  • stainless steel design

Dimensions

Type Vol. Load Cap.
2025.Duo 2 x 900 l 1500
2025.Trio 3 x 600 l 1500
Kippbehälter 2025

2026 Tipping Skip

with round cover
.

Technical Specifications

The drum stands out due to its conic side walls for easy loading and unloading, solid all-round edge section and massive, reinforced base frame. The tipping mechanism can be unlocked via rope pull, with chain for slipping protection.

As standard in Eichinger-Orange (similar to RAL 2000) with galvanised cover.

Supplementary Equipment

Can be supplied as option:

  • 2 steering and 2 horse rollers
  • pushing handle
  • lifting lugs
  • lifting coupling
  • in RAL special colour, lacquered
  • in RAL special colour, powder-coated
  • zinc-dipped design
  • stainless steel design

Dimensions

Type Vol. Load Cap.
2026.10 750 1000
2026.12 1000 1000

2028 Stacking Tipper

can also be stacked
in filled status

Technical Specifications

The stacking tipping skip is designed with its side walls with massive sections for extreme loads. Strong edge
corner sections and edge rounding reinforce the load capacity during loading and unloading.

To be used with tipping gear 2028.

3-fold stackable.

As standard in Eichinger-Orange (similar to RAL 2000).

Supplementary Equipment

Can be supplied as option:

  • removable intermediate bottom
  • 2 steering and 2 horse rollers
  • pushing handle
  • cover, galvanised, multi-pieces
  • oil and watertight
  • lifting lugs
  • lifting coupling
  • in RAL special colour, lacquered
  • in RAL special colour, powder-coated
  • zinc-dipped design
  • stainless steel design

Dimensions

Type Vol. Load Cap.
2028.4 300 500
2028.8 550 1000
2028.10 700 1500
2028.12 900 2000
2028.14 1500 2000
2028.16 2000 2000

2029 Tipping Gear

multi-purpose for fork lift
and crane

Technical Specifications

The robust, twist-free lifting beam for transporting and tipping of stacking containers (like model 2028) is
equipped with fork lift docking rails and also with four massive lifting lugs from steel. The tipping mechanism
can be operated from the fork lift seat via a rope pull, with slipping protection.

As standard in Eichinger-Orange (similar to RAL 2000).)

Supplementary Equipment

Can be supplied as option:

  • in RAL special colour, lacquered
  • in RAL special colour, powder-coated
  • zinc-dipped design
  • stainless steel design

Dimensions

Type suitable for Load Cap.
2029.4 2028.4 1000
2029.8 2028.8 1500
2029.10 2028.10 1800
2029.12 2028.12 2000
2029.14 2028.14 2200
2029.16 2028.16 2500